4
© 2019 Antari Lighting and Effects Ltd.
www.antari.com
Setting Up
Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm of open
space around the machine.
Step 2: Fill the fluid tank with Antari approved fluid.
Step 3: Connect the machine to a suitably rated power supply. To determine the power requirement
for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly grounded to
avoid risk of electrocution.
Step 4: Turn on the machine and allow it to heat up. Heat up takes approximately 13 mintues. Once
the machine has reached operating temperature, the LCD display will sho
w “Ready To Fog”. Now the
machine is ready for operation.
Step 5: To start making fog, locate the rotary knob on the right side of control panel, and press the
rotary knob to start making fog.
Step 6: To turn off the machine, press rotary knob again button and turn Powercon to the OFF
position.
Operation
Control Panel Operation
The machine can be operated with the onboard digital control interface.
TIMER
VOLUME
HOLD 3 SECONDS
Antari M-11
Ready To Fog
