Congratulations on the purchase of your new
ANTARI IP-1000 Fog Machine
Introduction
Thank you for choosing the
-1000 Fog Machine. You now own a rugged and
ANTARI IP
powerful state-of-the-art machine. Prior to use, we suggest that you carefully read all of the
instructions. By following the suggestions found in this user manual, you can look forward to
the reliable and satisfactory performance of your
fog machine for years to come.
ANTARI
Please follow these operation, safety and maintenance instructions to ensure a long and safe
life for your fog machine.
CAUTION:
Prior to plugging in the unit,
Please place fluid tube into a properly filled fog fluid tank.
Danger of Electric Shock
Use a 3-prong grounded electrical outlet only. Prior to use, take care to determine that the
unit is installed at the rated voltage.
Turn off or unplug the machine when not in use.
This machine is spray-proof. However, the attached remote controller is not spray-proof.
When operating this unit outdoors or in humid environment, please do not let the nozzle
exceed horizontal level. Otherwise, water might go into the nozzle and damage the unit.
Also, an earth leakage circuit breaker must be installed to prevent possible electrical shock
accident.
No user serviceable parts inside. Contact your
dealer or other qualified service
ANTARI
personnel when maintenance is required. Removing upper cover or modifying any part of the
machine randomly might cause danger and disable the spray-proof and dust-proof functions.
spray-proof means basically, the
-1000 can be operated outdoors or in humid
I P
environments as long as an earth leakage circuit breaker is installed. However, please do
not put the whole machine into water as this model is not completely waterproof.
Danger of Burns
This device is for adult use only and must be installed out of the reach of children. Never
leave the unit running unattended.
Never aim the output nozzle directly at people.
Fog machine output is very hot. Avoid coming within 50 cm of the output nozzle during
operation.
Never aim the output nozzle at open flames.
The output nozzle becomes very hot during operation (200° C). Keep flammable materials at
least 50 cm away from the nozzle.
Always allow your
fog machine to cool down before attempting to clean or service it.
ANTARI
Danger of Explosion
Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid or fluid
tank.
Use only Antari high-quality, water-based fog liquid that your dealer recommends. Other fog
liquids may cause clogging or damage the fog machine.
User Manual
-1000 Fog Machine
IP
English
-
Deutsch
-
Français
-
01
