4. Installation
F
F1
F2
Ø=120 mm
F3
Motor Unit
XT44ELH, XT48ELH, XT52ELH, XT62ELH
Valid for models:
XT44EH, XT48EH,
XT52EH, XT62EH
1
Opening the Winch
First of all, unscrew the upper
ring (R) with the provided key
(K). Thus lift the drum (D) to
access the anchoring holes
on the skirt (S) of the winch.
Winch Motor Disassembly
Disassemble the new Winch
XT-EH:
After lifting the Drum (D), it
is possible to remove the
skirt (S) of the winch from the
flange (F), unscrewing the 6
screws F1.
Remove the Motor Unit:
Remove the Motor Unit from
the flange (F), unscrewing
the screws F2.
Install XT-EH
Drill the deck:
Drill the deck (Ø = 120 mm)
to let the reduction-gear
motor unit through.
Fix the Motor:
Thus, fix the flange F on the
deck with 6 anchoring screws
F3 from above (not supplied
by Antal). Finally Install the
Motor Unit screwing in the F2
screws.
2
3
K
R
S
D
Installation and Maintenance
7