2. Electric System
The thermal switches indicated in the following table have dimensions
calculated to break the circuit in case of exceptional overload; it is
possible to consider thermal relays with a setting at a lower level.
Control Box
Switches - Mod. 251.035
Contains the solenoids for activating the motor in button control
operation.
Breaker
Two switches are needed to activate the two speeds of each winch;
these are conventionally the red one for the first and the grey one for
the second speed.
Although the microswitch is protected by a watertight diaphragm, the
stainless steel ring nut is provided with a seat for sealant; more
sealant must also be put in the hole through which the electric wire
passes.
70
0
I
Ø 54
86
105
64
M1
A1
C
A2
+
-
M2
23
SEALANT
SEALANT
Ø 65
Ø 80
XT40EH, XT44EH, XT48EH, XT52EH, XT62EH
Installation and Maintenance
4