Antaira Technologies - Industrial Ethernet Switches
LNX-C500 Series User Manual V1.0
7
2.7 Wiring the Power Inputs
Please follow the below steps to insert the power wire.
1. Insert the positive and negative wires into the PWR1 (V1+, V1-) and PWR2 (V2+, V2-)
contacts on the terminal block connector as shown below in
Figure 2.6
.
2. Tighten the wire-clamp screws to prevent the wires from loosening, as shown below in
Figure 2.7
.
Figure 2.7
Power Terminal Block
Figure 2.6
Power Terminal Block
