ANTAIRA LNP-1002C-SFP Скачать руководство пользователя страница 5

Страница: 5 / 24

Antaira Technologies - Industrial Ethernet Switches

LNP-1002C-SFP series User Manual V1.2

1. Overview

Antaira Technologies’ LNP-1002C-SFP industrial PoE+ Gigabit unmanaged Ethernet switch series

is IP30 rated and DIN-Rail mountable. Each unit is designed with 8*10/100TX Ethernet ports that

are IEEE 802.3at compliant (power-over-Ethernet plus) on ports 1-8 (30W/Port), and 2*Gigabit

combo ports (2*10/100/1000Tx RJ45 and 2* 100/1000 SFP slots for fiber). This series is ideal for

applications that demand high bandwidth and long distance communication.

This product series provides a high EFT and ESD protection to prevent any unregulated voltage

and is suitable for harsh environments. It supports the power redundancy feature using a dual

power input design with reverse polarity protection. In addition, the built-in relay warning function

alerts maintainers when power failures occur.

The LNP-1002C-SFP series includes two models: one with an operating temperature range of -10

to 70°C and the other with an extended operating temperature range of -40 to 75°C. This product

series has been designed to fulfill special needs for industrial automation and harsh outdoor

environment applications.

1.1 Key Features



System Interface/Performance



All RJ-45 ports support Auto MDI/MDI-X Function



Embedded 8*10/100Tx (PSE 30W/Port), 2*Gigabit Combo Ports (2*10/100/1000Tx

RJ45, and 2* 100/1000 SFP Slots)



Store-and-forward switching architecture



8K MAC address table



Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC



Power Input



DC 48 ~ 55V redundant power



Operating Temperature



Standard operating temperature model: -10°C ~ 70°C



Extended operating temperature model (–T): -40°C ~ 75°C



Case/Installation



IP-30 protection



DIN-Rail and wall mount design

Содержание LNP-1002C-SFP

























Результаты поиска

Содержание LNP-1002C-SFP

Отзывы:

Похожие инструкции для LNP-1002C-SFP

Бренды по названию

Популярные бренды

ANTAIRA LNP-1002C-SFP, Руководство пользователя

Результаты поиска

Содержание LNP-1002C-SFP

Отзывы:

Похожие инструкции для LNP-1002C-SFP

Бренды по названию

Популярные бренды