ANTAIRA LNP-0800G Series, Руководство по оборудованию

Страница: 10 / 22

Antaira Technologies - Industrial Ethernet Switches
LNP-0800G Series - Hardware Manual - v1.0
2.4 LED Indicators
There are LED light indicators located on the front panel of the industrial Ethernet switch that display the power status and
network status. Each LED indicator has a different color and has its own specific meaning, see below in Table 2.1 .
LED Color Description
P1 Green
On Power Input 1 is active
Off Power Input 1 is inactive
P2 Green
On Power Input 2 is active
Off Power Input 2 is inactive
Fault Red
On Power Input 1 or 2 is inactive
Off Power Input 1 and 2 are both functional
LAN Port 1~8
(Upper LED)
Green
On Connected to network, 10/100/1000Mbps
Flashing Networking is active
Off Not connected to network
LAN Port 1~8
(Lower LED)
Green
On The port is supplying power to the powered-device
Off No powered-device attached or power supplying fails
Table 2.1 - LED Indicators
Note: “P1” is the abbreviation for “Power 1”, “P2” is for “Power 2”, “LNK” is for “Link”, and “ACT” is for “Activity”.
5