ANTAIRA LNP-0602 Series, Руководство пользователя

Страница: 4 / 20

1
Introduction
Antaira’s LNP-0602 series switches are smart 6-port Industrial Unmanaged Ethernet
Switches supporting IEEE-802.3at compliant (Power-over-Ethernet Plus) on ports 1 to 4.
It comes with 2-Port 100Fx of SC or ST type connector and support Multi-mode in 2Km,
or Single-mode in 30Km.
The LNP-0602 series switches supply power source up to 30 watts/per port @
51~55VDC output; with 48~55VDC power inputs support. This series switches offer
Extend Operating Temperature model (w/-T) supports -40°C ~ 75°C. It supports IEEE
802.3/802.3u/802.3x with 10/100BTx, full or half duplex, MDI/MDI-X auto sensing to
provide an economical solution for the Industrial Ethernet Network.
In addition, the Network Broadcast Storm Protection and built-in relay warning function
alerts network engineers when power failures or port breaks occur.
Features

System Interface/Performance

RJ-45 ports support Auto MDI/MDI-X Function

Embedded 4-port 10/100Tx w/PoE+ and 2-port 100Fx SC/ST type connector
(Multi / Single mode)
 Store-and-Forward Switching Architecture

Broadcast Storm Protection

2K MAC Address Table

Port Break Alarm Mask

Power Input
 DC 48 ~ 55V Redundant Power
 Operating Temperature

Standard Operating Temperature model: -10°C ~ 70°C

Extend Operating Temperature model with –T: -40°C ~ 75°C

Case/Installation
 IP-30 Protection

Installation in Pollution Degree 2 Environment

DIN Rail and Wall Mount Design

Provides EFT protection 2,000 VDC for power line

Supports 6,000 VDC Ethernet ESD protection