ANTAIRA LMX-0800G Series Скачать руководство пользователя страница 16

Страница: 16 / 19

Antaira Technologies - Industrial Ethernet Switches

LMX-0800G Series Hardware Manual V1.2

4. Hardware Installation

4.1 Installation Steps

This section will explain how to install Antaira’s LMX-0800G series: 8-port industrial gigabit

managed Ethernet switches with 8*10/100/1000Tx ports.

Caution: This device is intended for use indoor and at altitudes up to 2000 meters.

Caution: The device is intended to be installed in an industrial control enclosure and panel.

Installation Steps

1. Unpack the industrial Ethernet switch from the original packing box.

2. Check if the DIN-Rail bracket is screwed on the industrial Ethernet switch.



If the DIN-Rail is not screwed on the industrial Ethernet switch, please refer to the

DIN-Rail Mounting section for DIN-Rail installation.



If you want to wall mount the industrial Ethernet switch, please refer to the Wall

Mounting section for wall mounting installation.

3. To hang the industrial Ethernet switch on a DIN-Rail or wall, please refer to the Mounting

Installation section.

4. Power on the industrial Ethernet switch and then the power LED light will turn on.



If you need help on how to wire power, please refer to the Wiring the Power Inputs

section.



Please refer to the LED Indicators section for LED light indication.

5. Prepare the twisted-pair, straight-through category 5 cable for Ethernet connection.

6. Insert one side of the RJ-45 cable into switch’s Ethernet port and on the other side into the

networking device’s Ethernet port, e.g. switch PC or server. The Ethernet port’s (RJ-45) LED

on the industrial Ethernet switch will turn on when the cable is connected to the networking

device.



Please refer to the LED Indicators section for LED light indication.

7. When all connections are set and the LED lights all show normal, the installation is complete.

4.2 Maintenance and Service



If the device requires servicing of any kind, the user is required to disconnect and remove it from its
mounting. The initial installation should be done in a way that makes this as convenient as possible.



Voltage/Power lines should be properly insulated as well as other cables. Be careful when handling
them so as to not trip over.



Do not under any circumstance insert foreign objects of any kind into the heat dissipation holes

Содержание LMX-0800G Series




















Результаты поиска

Содержание LMX-0800G Series

Отзывы:

Похожие инструкции для LMX-0800G Series

Бренды по названию

Популярные бренды

ANTAIRA LMX-0800G Series, Руководство по оборудованию

Результаты поиска

Содержание LMX-0800G Series

Отзывы:

Похожие инструкции для LMX-0800G Series

Бренды по названию

Популярные бренды