Antaira Industrial Ethernet Switches
LMP-0501 Series User Manual V1.0
8
2.6 Fiber Port
Antaira
’s LMP-0501 series provide model options to help support one major fiber optical port and
models for either an SC or ST type fiber connector.
-
The multi-mode up to 2 km, 1310 nm in 50/125 µm, 62.5/125 µm
-
The single-mode in 30km, 1310 nm in 9/125 µm
When connecting the fiber port to another fiber port, please follow the figure below to connect
accordingly. The wrong connection will cause the port to NOT work normally.
Caution
This is a Class 1 Laser/LED product.
*Don’t stare into the laser/LED beam.*
2.7 Cabling
Twisted-pair segments can be connected with an unshielded twisted pair (UTP) or shielded
twisted pair (STP) cable. The cable must comply with the IEEE 802.3u 100Base TX
standard (e.g. Category 5, 5e, or 6). The cable between the equipment and the link partner
(switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
Fiber segment using
single-mode
connector type must use 9/125μm single-mode fiber
cable.
Fiber segment using
multi-mode
connector type must use 50 or 62.5/125 μm multi-mode
fiber cable.
Figure 2.6 - Fiber Ports Connection
