ANTAIRA FCU-280 Series, Руководство пользователя

Страница: 17 / 24

17
SFP Model Installation
Step 1: Connect the fiber cable. Attach the duplex LC
connector on the network cable into the SFP
transceiver.
Step 2: Attach fiber cable from the media converter to the
fiber network. TX, RX must be paired at both ends.
Step 3: Connect the 5VDC power adapter to the media
converter and verify that the Power LED is lit.
Step 4: Turn on the power of the device/station; the PWR
LEDs should light when all cables are attached.
Figure 9:
SFP Model installation
Note
It’s recommended that Antaira SFP Modules be
used in the Antaira converters. If you insert a SFP
transceiver that is not supported, the converter
will not recognize it.