ANTAIRA FCU-280 Series, Руководство пользователя

Страница: 16 / 24

16
5. installing the conVerter
Stand-alone Installation
To install a FCU-280x stand-alone, on a desktop or shelf, simply
follow the steps below:
Step 1: Turn off the power of the device/station on the
network to which the FCU-280x will be attached.
Step 2: Ensure that there is no activity in the network.
Step 3: Attach fiber cable from the FCU-280x to the fiber
network. TX, RX must be paired at both ends.
Step 4: Connect the 5VDC power adapter to the FCU-280x
and verify that the Power LED is lit.
Step 5: Turn on the power of the device/station; the PWR
LEDs should light when all cables are attached.
Figure 8: FCU-280x installation
Note
To prevent from optic acceptor malfunction, check
both wires / transmitter before powering on the
converter.