ANTAIRA APX-5700 Скачать руководство пользователя страница 8

Страница: 8 / 72

Antaira Industrial Gigabit IEEE 802.11b/g/n Wireless
APX-5700 User Manual V 1.0

1.1 Features and Benefits

Point-to-Point & Point-to-Multipoint Support

Point-to-point and point-to-multipoint communication between different buildings enable users to

bridge wireless clients that are kilometers apart while unifying the networks.

Virtual AP (Multiple SSID)

Virtual AP implements multi-SSID (mSSID) allowing a single wireless system to be set up with multiple

virtual AP connections with different SSIDs or Basic Service Set Identifiers (BSSID) and different

security settings.

Highly Secured Wireless Network

The access point supports the highest available wireless security standard which is IEEE802.11i

compliant. The access point also supports IEEE 802.1x for a secure and centralized user-based

authentication. Wireless clients are thus required to authenticate through highly secure methods like

EAP-TTLS and EAP-PEAP, in order to obtain access to the network.

uConfig Utility

The uConfig utility allows users to access the user-friendly web configuration interface of the access

point without having to change the TCP/IP setup of the workstation.

HTTPS

The access point supports HTTPS (SSL) in addition to the standard HTTP.

HTTPS (SSL) features additional authentication and encryption for secure communication.

Telnet

Telnet allows a computer to remotely connect to the access point Command Line Interface (CLI) for

control and monitoring.

SSH

Secure Shell Host (SSH) establishes a secure host connection to the access point

’s CLI for control and

monitoring.

Содержание APX-5700









































































Результаты поиска

Содержание APX-5700

Отзывы:

Похожие инструкции для APX-5700

Бренды по названию

Популярные бренды

ANTAIRA APX-5700, Руководство пользователя

Результаты поиска

Содержание APX-5700

Отзывы:

Похожие инструкции для APX-5700

Бренды по названию

Популярные бренды