ANTAIRA APX-5700 Скачать руководство пользователя страница 30

Страница: 30 / 72

Antaira Industrial Gigabit IEEE 802.11b/g/n Wireless
APX-5700 User Manual V 1.0

DHCP Mode:



None:

Function disabled.



DHCP Server:

Check the box to enable the option. The device will then act as the IP address

distribution server and will automatically issue an IP address and other network information to

the DHCP client that has requested it.



DHCP Relay:

Check the box to enable the option. Then, enter the IP address of the remote

DHCP server where the DHCP client request will be relayed.

DHCP Start IP Address:

Enter the starting IP address, which will be issued.

DHCP End IP Address:

Enter the last IP address the server will issue.

Netmask:

Allows the user to set the IP class for the IP address range set for the start and end address.

Note:

If the device is also the router then the IP class must be the same as the device IP class.

DHCP Lease Time:

Enter the new lease time in seconds (default is

3600

seconds or 1 hour).

DHCP Server Relay IP:

Enter the IP address of the remote DHCP server where the DHCP client

request will be relayed to get the IP address.

DHCP Gateway Relay IP:

Enter the IP address of the remote gateway where the DHCP client request

will be relayed to get the gateway IP address.

Enable DNS Proxy:

Check the box to enable this function. Then, the device router operation will act

as a proxy to resolve all DNS requests.

DHCP Reservations

Click

Add

to enter each device’s IP address and MAC address that will be used. All DHCP active lease

devices are displayed in the

Status

tab page from the

More Status

selection.

Содержание APX-5700









































































Результаты поиска

Содержание APX-5700

Отзывы:

Похожие инструкции для APX-5700

Бренды по названию

Популярные бренды

ANTAIRA APX-5700, Руководство пользователя

Результаты поиска

Содержание APX-5700

Отзывы:

Похожие инструкции для APX-5700

Бренды по названию

Популярные бренды