EN
8
an electrician), you can replace power switches
and wall sockets, fit plugs, extension cords and
light sockets. Incorrect installation can result in
fatal injury and the risk of fire.
SYMBOLS
The product must be
discarded if the glass
front is cracked.
The minimum distace to
an illuminated object is 1
metre when the product is
switched on.
Approved in accordance
with the relevant directives.
Recycle discarded product
as electrical waste.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
50 W
Protection rating
IP65
Energy class
C
Luminous flux
3750 lm
Colour temperature
4000 K
Dimmable No
INSTALLATION
1. Switch off the power supply.
2. Remove the bracket from the housing.
3. Use the bracket as a template to mark
out the mounting holes and drill holes in
these positions. Put expander plugs in the
holes. Screw on the bracket.
SAFETY INSTRUCTIONS
• Always switch off the power supply before
installation, connection and service.
• The product must be connected to an
earthed power supply on installation.
• The product can be mounted on a surface
of flammable material.
• Check that the mains voltage corresponds
to the rated voltage on the type plate.
Incorrect connection can result in electric
shock. The electrical installation should be
carried out by an authorised electrician.
• Never modify the product, this could result
in serious personal injury and will
invalidate the warranty.
• A damaged power cord or plug must be
replaced by an authorised service centre
or other qualified personnel to ensure
safe use.
• The product must be discarded if the glass
front is cracked.
• The LED light source is not replaceable.
When the light source has reached the
end of its useful life the complete product
must be replaced.
WARNING!
• This product becomes very hot during
use. Risk of burns. Keep combustible
materials away from the product.
• Ensure good ventilation to provide
adequate cooling for the product.
• The minimum distace to an illuminated
object is 1 metre when the product is
switched on.
• The minimum distance to objects above
the product is 15 cm.
ELECTRICAL SAFETY
New installations and extensions to existing
systems should always be carried out by an
authorised electrician. If you have the necessary
experience and knowledge (otherwise contact
