40
ORIGINAL OPERATING INSTRUCTIONS RM7.0 - ELECTRIC DRIVE FOR PEDELECS
11.6 MULTI-FUNCTION DISPLAY
When the unit is switched on, you can alternate between the total kilome-
tres ‚ODO‘, travel time for the day ‚TIME‘, date ‚DATE‘, time ‚CLOCK‘, average
speed ‚AVG‘, power ‚W‘ and kilometres for the day ‚TRIP‘ by briefly pressing
button (T3) one or more times. If the display is on ‚TIME‘ or ‚TRIP‘, you can
simultaneously reset the values for the day‘s travel time and kilometres to
‚0‘ by pressing button (T3) longer (> 2 sec.). If any button is pressed on the
control unit or the display itself, the backlighting is set to maximum for 5
sec. Otherwise the backlighting is controlled by brightness and changes
depending on the ambient light.
11.7 CALCULATING THE RANGE
In addition to the actual capacity indicator, the drive also has a program
for calculating range. Depending on the set level of motor assist and the
current draw from the battery, the operating range possible with the capa-
city still available in the battery is continuously calculated and displayed
in real time.
11.8 PUSHING AID (OPTIONAL)
Depending on the model, your drive can be equipped with a pushing aid.
Pressing button (T5) changes the bottom indicator in the display from the
currently set function to ‚SCOOP‘. If your drive is equipped with a pushing aid,
the motor runs up to a maximum of 6 km/h without being assisted by pedal-
ling. As soon as the button is released, the motor drive turns off again. If the
motor does not start running even with ‚SCOOP‘ on the display, your drive is
not equipped with a pushing aid.
11.9 BICYCLE LIGHTING (OPTIONAL)
Depending on the model, your bicycle can be equipped with a function for
switching the bicycle lighting on/off on the display. Briefly pressing button
