ANSMANN Powerline 4 Light, Инструкция по эксплуатации, Страница: 7 / 42

physical, sensory or mental capabilities. In addition, novice users
who have not fully read these instructions should be supervised or
given instruction before use!
> If the safety instructions are not followed, it may lead to damage
to the unit or battery and could cause injury to the user!
> We recommend the use of ANSMANN rechargeable batteries with
this product!
FUNCTIONAL OVRVIW
> Desktop charger for 1-4 AAA or AA NiMH/NiCd cells
> Includes 1 USB charging socket (5V / 1000mA)
> The battery’s charge condition is not important prior to charging
> Charging starts automatically when a battery is inserted
> Microprocessor controlled charging and monitoring of the charging
status
> Intelligent battery full detection (-dV)
> Automatic changeover to trickle charge
> Multiple over-charging protection per cell
> Individual supervision of each cell
> Reverse polarity protection
> Faulty cell detection / accidental alkaline insertion detection
> LCD indication of the charging status and battery voltage for each
charging slot
> For worldwide use (100-240V AC / 50-60Hz)
OPRATION
Please insert the mains input plug (included) so that it connects to
the two power contacts located on the power supply and push the
plug until it clicks in to place (see illustration [1]). Please ensure
that you hear the input plug click into the power supply to ensure
that the unit is safe to use. Connect the power supply to the charger
with the output plug. Finally, connect the power supply to the mains
(100-240V AC 50-60Hz).
The charger is now ready for use. You can
either insert up to 4
AA/AAA (or a combination of both sizes) NiMH/NiCd rechargeable
batteries
or you can connect a USB cable using the USB charging
socket to charge other devices such as a mobile phone, smart phone
or MP3 player.
Insert all batteries with their correct polarity, corresponding to the
symbols in the charging slots. The charging process starts automa-
tically.
When charging of round cells is in progress, the USB charging socket
is disabled. When charging a device via USB, it is not possible to
charge any round cells!
It is normal that batteries may become warm during charging. After
charging is complete, the charger switches automatically to trickle
charge. The trickle charge compensates for the self-discharge of bat-
teries when left in the charger.
LCD DISPLAY
In the illustration [2] you can see examples of the following indi-
cations:
A) „--“ is displayed when the charger is connected to mains and there
is no battery in the charging slot or no device is connected to the USB
charging socket.
B) „CHARG“ and the actual battery voltage in volts respectively
the charging status in 5% steps are displayed during the charging
process. The display alternates between the battery voltage and the
charging status every 5 seconds. The USB charging socket is disabled.
C) „FULL“ and the actual battery voltage in volts are displayed when
a battery is fully charged. The charger automatically switches to trick-
le charge function. The USB charging socket is still disabled.