GB
OPEratInG InStructIOnS DIGISPEED 4
uSE Of thE charGEr
One hour ultra-fast charger for 1-4 NiCd or NiMH batteries of the sizes
Micro (AAA) or Mignon (AA); Powered by AC or 12V DC adaptor. Please
only use fastrechargeable NiCd- or NiMH-rechargeable batteries.
fEaturES
Separate charging processes for each battery inserted (individual
supervision of each cell position); Faulty cell detection; Automatic start
of the charging process once the batteries make contact regardless of
the charging status before insertion; NiMH or NiCd selected via switch;
Microprocessor control of the charging status; –delta V control and safety
timer; Trickle charging; Automatic matching of charging current and
protection against reverse polarity; LED charging status indicators for each
cell
InDIcatOrS
lED red:
battery is being charged
lED red flashes:
1. Defective cell. The charging current is cut off.
Change battery 2. Rechargeable battery incorrectly inserted (insert again
checking polarity) 3.Disposable battery inserted (remove battery)
lED green:
battery fully charged. After termination of fast charging the
unit switches over to trickle charging. The cells may be left in the charger
until they are needed without being overcharged or losing capacity.
warnInG!
Only charge either NiMH or NiCd batteries with the correct switch
position. Never mix both battery types. Danger of explosion if other types
of batteries (Alkaline, RAM etc.) are inserted.
SafEty MEaSurES
Keep charger in a dry place (inside vehicle or indoor use only). In order
to avoid the risk of fire and/or electric shock, the unit must be protected
against high humidity and water. Do not use if there are signs of damage
to the housings, cables or connectors
OPEratIOn
Place the charger on a level surface and ensure that the vents are not
covered. Select either NiMH or NiCd using the selector switch. Once the
unit is connected to the mains (see type plate), or to the 12 V DC adaptor
and the corresponding (NiMH or NICd) rechargeable battery is inserted,
the charging process starts automatically. When inserting the batteries
please pay attention to the correct polarity and type (NiMH/NiCd). When
several cells are to be charged, they do not need to be inserted at the