ANSMANN 1600-0307, Руководство пользователя

Страница: 10 / 36

10
ATTENTION
§
The product contains a non-replaceable Li-Ion rechargeable battery. Do not throw
the product into a fire!
§
The product may only be charged in closed, dry and spacious rooms, away from com-
bustible materials and liquids. Disregard can result in burns and fires.
§
Never open, crush or heat a rechargeable battery or set it on fire.
§
Do not use the product in potentially explosive areas or in the rain and do not expose
it to excessive heat.
§
Do not use the product if it appears to be damaged
FIRST USE
The light has a swivel joint in the centre of the lamp to ensure the best possible illumination.
The on/off button is located above the micro-USB charging socket.
1x Main-LED 100%
2x Main-LED 50%
3x Main-LED 10%
4x TOP-LED 100%
If the button is not pressed again for three seconds, the light can be switched off by the
next click.
CHARGING
8. Charge the workshop lamp fully before using for the first time. If the lamp has been
stored for an extended period of time, it should also be charged before use; charge
regularly during longer periods of non-use.
9. Switch the lamp off before charging. For charging, pull the sealing cap off the
micro-USB socket on the side of the lamp. Connect the USB charger to the lamp by
plugging the micro-USB plug on one end of the USB/micro-USB charge cable into
the micro-USB socket on the lamp and plugging the USB plug on the other end of the
charge cable into the USB socket of the USB charger.
10. Note: Do not active the workshop lamp during charging. Check that the lamp is swit-
ched off after starting the charging process.
RESIDUAL BATTERY CAPACITY INDICATOR |
CHARGE CONTROL INDICATOR
§
The capacity is indicated by an LED display (4 LEDs). The number of LEDs is equal to
the remaining battery capacity.
§
If the capacity is low, only one LED flashes and the light is immediately recharged.
Otherwise the light is switched off automatically.
§
The charging process is indicated by a flashing LED. When the battery is fully char-
ged, all 4 LEDs light up green.
§
Lights during the charging process are not permitted.
CLEANING/MAINTENANCE
§
Clean only with a slightly damp cloth, then rub it dry.
§
Never submerge the product in water or other liquids.
§
Do not allow fluids to enter the housing.
§
Do not use hard brushes or sharp objects for cleaning.
Improper usage of the lamp may result in it being damaged:
§
Do not throw or drop
§
Use only in original condition
§
Do not use while still in packaging
§
Turn off after use
Deutsch | English | Français | Español
Svenska | Italiano | Nederlands | Portuguese