EN
17
SAFETY INSTRUCTIONS
Read the operating instructions carefully before use.
Save them for future reference.
•
Switch off the power supply before installation, dismantling or any other work.
•
The earth wire must always be connected.
•
Use wires with a cross-sectional area of at least 1 mm².
•
Use a 2-pin power switch.
•
The bulb gets hot when it is switched on. Do not touch the bulb until it
has cooled.
•
Disconnect the power supply and allow the bulb to cool before replacing.
•
Never use bulbs with a higher output than specified on the type plate and in
Technical data.
•
Never use the product if the cover (top part) is damaged. Replace the cover as
soon as possible.
•
Do not look directly at the light source.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Protection rating
IP44
Socket E27
Max output (light source)
60 W
Dimensions
25.5 x 24 x 34 cm
Operating instructions for
wall lamp
ENGLISH
