ENGLISH
8
ENGLISH
Read the Operating Instructions carefully before use.
INSTALLATION
1.
Install the product by tapping the spike into the ground.
2.
Wet the ground first if it is very hard.
3.
Do not place solar cell lamps near sources of light such as street lamps, as this may prevent them
from lighting up.
4.
Place the product so that it is exposed to full sunlight at least 8 hours per day.
USE
Before using for the first time
NOTE:
Charge the battery before using it for the first time.
1.
Check that the power switch is in the OFF position and place the product so that it is exposed to as
much sunlight as possible for 36–48 hours. The light reaches its optimal brightness when the
battery is fully charged, after 4 days with maximum sunlight.
2.
When the battery is fully charged, move the power switch to the ON position. The solar cell light
goes on automatically when it gets dark, and is charged during the daytime.
Replacing the battery
For optimum functionality, replace the battery every year.
1.
Pull up the spike.
2.
Open the battery compartment by unscrewing the 4 screws on the underside of the casing.
3.
Be careful not to strain or damage the wires
4.
Replace the battery with a new lithium ion battery of the LS14500 type.
5.
Replace the casing and secure with the 4 screws.
6.
Fully charge the new battery in accordance with the above instructions.
The position, weather conditions and season affect the length of time that the batteries can power the
light. When it is cloudy, and when the days are shorter, the batteries do not get fully discharged, which
results in a weaker light and shorter illumination time.
ON/OFF
