Anslut 017632, Руководство по эксплуатации

Страница: 12 / 20

EN
12
INSTALLATION
IMPORTANT:
Switch off the power supply before installing
the product.
1. Switch off the power supply.
2. Measure out where the light is to be placed.
3. Drill holes.
4. Thread the supplied silicone caps on the
wires.
5. Connect the wires to the correct terminals
and make sure that no copper wires are
exposed outside the terminals.
6. Switch on the power supply.
MAINTENANCE
IMPORTANT:
Disconnect the power supply before cleaning
the product.
1. Wipe the light with a dry or slightly damp
cloth.
2. Wait until the light is completely dry
before switching the power supply on
again.
NOTE:
Do not use detergents, alcohol, solvents or
the equivalent to clean.
DISMANTLE PROCESS
1. Dismantle the rear cover.
BILD 1
2. Take off the terminal.
BILD 2
3. Dismantle the 2 screws.
BILD 3
4. Take the clips off the cover.
BILD 4
5. Dismantle the cover.
BILD 5
6. Finished.
BILD 6