EN
18
on the product. The display shows the last
temperature setting and heating mode is
activated.
9. Pull out the plug after use.
SETTING THE TIMER
The run time can be set from 1 to 8 hours.
The product switches off automatically after
the set time.
1. Start the product.
2. Press the button twice (5) twice. 0H (for
0 hours) flashes on the display. Set the
required run time with the b (3)
and – (4).
3. The required temperature can be set
when the set run time is no longer shown
on the display. The display then switches
between showing the set run time and
the set temperature.
4. Heating mode is deactivated
automatically when the set run time has
passed and the product goes into standby
mode.
OVERHEATING PROTECTION
The product has over heating protection,
which switches off the product if it overheats.
NOTE:
The plug must be unplugged for at least
10 minutes before the product is restarted.
MAINTENANCE
NOTE:
Switch off the product, pull out the plug,
and allow it to cool before cleaning.
• Wipe the product with a damp cloth.
• Do not use petrol, detergent or solvent.
• Store the product in a dry, clean place and
protected from dust when not in use.
Содержание 017392
Страница 3: ...2 23 1 1 2 3 4 5 1 2 3 4 5...
