Anslut 014811, Руководство по эксплуатации

Страница: 23 / 52

EN
23
INSTALLATION
BEFORE INSTALLATION
Remove all packaging material. Keep the
packaging material out of the reach of children
and pets – risk of suffocation. Check the
electric radiator, the power cord and plug for
damage. Do not use the electric radiator if any
parts are missing or damaged. Contact the
retailer in the event of any problems.
INSTALLATION
1. Turn the product upside down.
2. Align the mounting holes in the wheel
unit to the screws on the bracket on the
end radiator fin, and then fit the other
wheel unit on the other end.
FIG. 2
3. Lock the wheel units in place with the
4 wing nuts. Screw tight and stand up
the product on the wheels in the
required place.
FIG. 3
USE
PREPARATIONS AND HOW TO USE
• Check that the power cord and plug are
intact and undamaged.
• Check that the mains voltage
corresponds to the rated voltage on the
type plate.
The product must only be connected to
a correctly earthed power point.
STARTING AND POWER
SETTING
STARTING
Plug in, turn the temperature dial to "+", and
set the power dial to the required mode. The
product starts.
NOTE:
Failure to follow all the instructions and
safety instructions can result in a risk of
fire, electric shock, personal injury and/
or material damage. The manufacturer
cannot accept liability for personal injury
or material damage resulting from
failure to follow the instructions.
WARNING!
Some parts of the product get very hot
– risk of burn injuries. Keep the product
under careful supervision when it is
used by, or near children or persons with
functional disorders.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product as
electrical waste.
WARNING: Do not cover the
heater – risk of overheating.
TECHNICAL DATA
Voltage 230 V ~ 50 Hz
Output 2000 W
Cord length
1.8 m
Size 39,3 x 64 x 28 cm
DESCRIPTION
1. Control panel
2. Power cord fastener
3. Radiator fins
4. Wheel
FIG. 1