EN
44
Insert the transistor wires in the corresponding holes in the
product.
3. The approximate current amplification factor (hFE) for the
transistor for base current 10 µA and VCE 2.8 V is shown on
the product display.
TEMPERATURE MEASURING
1. Turn the measuring range switch to position TEMP. The
ambient temperature (room temperature) is shown in °C on
the multimeter display.
2. Connect the K thermoelement to the connections marked
VΩmA and COM.
3. The temperature in °C is shown on the multimeter display.
NOTE:
The K thermoelement type TP-01 can withstand up to 250°C
(temporarily up to 300°C). The supplied temperature sensor is
a very fast response thermoelement with bare wires, suitable
for many different types of temperature measurements.
CONDUCTION CHECK WITH AUDIO PROMPT
1.
Connect the red test wire to the connection marked VΩ mA,
and connect the black test wire to the connection marked COM.
2. Turn the measuring range switch to position
.
3. Connect the test wires to each end of the electric circuit to be
checked. If the resistance is less than 30 ±20 Ω the product
will give an audio prompt.
Содержание 009877
Страница 4: ...1 1 2 4 5 6 3...
