CLOCK & CALENDAR SETTING
Hold
“
CLK/CAL
“
button for 3 seconds to enter clock set. Using
“
+ , -
“
to adjust and
“
CLK/CAL
”
to confirm, the following values can be set in sequence: 12/ 24 hr > Year >
Month > Date > Hour > Minutes > ZONE Time
(Enter + - 12 hr in hour offset for different time zones, leave offset to 0 for home time) Press
SET/ ZONE to select home time and ZONE Time
PRESSURE, TEMPERATURE, HUMIDITY TREND INDICATORS
The 3 small arrow icons will indicate: Rising, Steady, Falling. Refresh rate is every hour.
MOON PHASE
The current moon phase is displayed automatically.
ALARM 1, ALARM 2 SETTING
Select AL 1 or AL 2 by pressing the AL key. Hold
“
AL
“
for 3 seconds. Press
“
+, -
“
to
enter the desired value and press
“
AL
“
to confirm setting.
To view alarm time 1 and 2, simply press
“
AL
”
button to read AL 1 and AL 2. The alarm time
will display for 5 seconds and resume to normal clock thereafter.
To turn AL 1, AL 2 on and off, press
“
+ (bell)
“
button
The unit will provide Crescendo Alarm which last for 2 minutes.
LOW BATTERY INDICATION
Low battery indication is available for the home unit itself and all of the remote channels.
Replace the batteries and follow the setup procedure as mentioned in this instruction manual.
SPECIFICATIONS
Range of temperature measurement:
Indoor unit
:
-5 C to 50 C (32F to 122F)
25% to 90% RH
Remote sensor :
-20 C to 60 C (14F to 140F)
25% to 90% RH
Transmission :
30M (100 ft.) open area, RF434 MHz
Resolution
:
0.1 degree C, 1%RH
Clock
:
Quartz pre-30 sec per month when out of RCC
Battery life
:
12 months (alkaline batteries recommended)
