Saving the Setup
Step 20. To save the configuration in one of the 10 available user setup locations, press
SAVE SETUP
and use the key pad or the Up/Down arrow key to select a loca-
tion (1 - 10), then press
ENTER
.
Recalling a Setup
The following procedure recalls a setup from memory.
Step 1. Press the
RECALL SETUP
key.
Step 2. Select the desired setup using the Up/Down arrow key and press
ENTER
to re-
call the display.
Saving a Display to Memory
Step 3. Press the
SAVE DISPLAY
key to activate the alphanumeric menu for trace stor-
age.
Step 4. Use the soft keys to enter a label for the saved trace.
For example, to save a display with the name “TX1 RETURN LOSS” press the
soft key group that contains the letter “T” then press the “T” soft key. Press the
soft key group that contains the letter “X” then press the “X” soft key. Press the
number “1” key on the numeric keypad. Use the softkeys and keypad as neces-
sary to enter the entire name, then press
ENTER
to complete the process.
NOTE: More than one trace can be saved using the same alphanumeric name,
as traces are stored chronologically, using the time/date stamp.
Recalling a Display From Memory
The following procedure recalls a previously saved display from memory.
Step 1. Press the
RECALL DISPLAY
key.
Step 2. Select the desired display using the Up/Down arrow key and press
ENTER
to re-
call the display.
4-4
Chapter 4 Measurements