Anritsu MG369 Series, Руководство по эксплуатации, Страница: 16 / 268

1-5
Electronic Manual
Updated manuals are available for download from the document area
of the Anritsu web site at: http://www.us.anritsu.com.
1-6
Related Manuals
This is one of a three manual set that consists of an operation manual,
a GPIB programming manual, and a maintenance manual.
GPIB
Programming
Manual The Series MG369XB Synthesized Signal Generator
GPIB Programming Manual provides information
for remote operation of the signal generator with
product specific commands sent from an external
controller via the IEEE 488 General Purpose Inter-
face Bus (GPIB). It contains a general description of
the GPIB and bus data transfer and control func-
tions, a complete listing and description of all
MG369XB GPIB product specific commands, and
several programming examples. The Anritsu part
number for the GPIB programming manual is
10370-10366.
Maintenance
Manual The Series MG369XB Synthesized Signal Generator
Maintenance Manual supplies service information
for all models in the MG369XB series. The service
information includes functional circuit descriptions,
block diagrams, performance verification tests, cali-
bration procedures, troubleshooting data, and as-
sembly and component removal/replacement
procedures. The Anritsu part number for the main-
tenance manual is 10370-10367.
1-7
Options
The series MG369XB synthesizer provides a wide array of instrument
configurations through a series of base model and option choices.
Table 1-1, on page 1-5, lists the available models with frequency
ranges. Refer to Appendix B, MG3690B RF/Microwave Signal
Generators Technical Datasheet, P/N: 11410-00344, for current
information.
1-4 MG369XB OM
Options General Information