Anritsu MG369 Series, Руководство по эксплуатации, Страница: 146 / 268

Press
PRF / Period
to select the display of Pulse
PRF or Pulse Period on the additional Internal
Pulse Status display. Selecting Pulse Period repre-
sents the pulse period as time. Selecting Pulse PRF
(Pulse Repetition Frequency) represents the pulse
period as a frequency.
You can enter the pulse repetition rate as either
time or frequency with these two choices. The Inter-
nal Pulse Status display will reflect your selection.
Press
Low RF On / High RF On
to select the polarity
of the signal (Low or High) that turns the RF on.
The Internal Pulse Status display will reflect your
selection.
Press
Clock 100 / 10
(with Option 26) or
Clock 40 / 10
(with Option 24) to select the pulse
generator’s clock rate. The soft-key label is
highlighted (in reverse video) to reflect your
selection. The example below shows a clock rate
selection of 100 MHz (below left) and 40 MHz (below
right).
Press
< Previous
to return to the Internal Pulse
Status menu.
3-112 MG369XB OM
Signal Modulation Local (Front Panel) Operation