Anritsu MA25101A, Руководство пользователя

Страница: 31 / 34

IQ Auto-Capture 4-4 Share Data Files
MA25101A UG PN: 10580-00476 Rev. B 4-9
The Process Log buttons are described in Table 4-5 .
4-4 Share Data Files
The captured signal data files are stored in a default file location created by the IQ Auto-Capture program as
shown in
Figure 4-9 .
The default storage location is: Documents > Anritsu > IQ Auto-Capture
The user can change the storage location.
Table 4-5. Process Log Buttons
Save the process log to a file.
Clears the Process Log. The log is not saved to disk. So if the file is not saved
manually, the contents are lost if cleared or the when exiting the program.
Note
IQ data files can consume a lot of space, so using the PC's primary drive my cause problems as the
disk fills up. A secondary drive may be used, but it should have a write speed sufficient to not slow
down the data acquisition.
Figure 4-9. Stored Data Files