Anritsu HA-400 Series, Инструкция по эксплуатации, Страница: 9 / 19

e7
4. Preparation for Operation
4.1. Battery Installation
Be sure to keep the power OFF during the battery
cells change.
●
The Reset switch is a small push button in the
upper section of the battery housing. Use a thin
stick to lightly press it.
●
When the Rest button is pressed, operation
begins in the same way as power is turned ON,
and the instrument will be ready for
measurement. When measurement is not intends
after battery change, turn power OFF.
(1) Open the battery
housing cover.
(2) Set battery cells
correctly.
(3) After setting battery
cells, press the Reset
switch.
(4) Close the battery
housing cover
completely.
Reset