Anritsu HA-400 Series Скачать руководство пользователя страница 2

 

 

e2 

TO ENSURE SAFE AND RELIABLE OPERATION

Concerning the battery cells 

Please observe the following matters to ensure safe 
and reliable operation of products. 
 

 

 

 This product should not be used for any purpose 
except temperature measurement. 

Stop using as soon as any problems are 

discovered. 

 Do not take the unit apart or remodeling. 

Use the specified battery cells or specified 

AC-Adaptor. 

This products is not rechargeable model. 

 Under  Electromagnetic  environment, 
Instrument may measure unstably. 

Please observe the following matters to guard the 
battery leakage, exothermic reaction and ignition. 
 

 

 

 Do not throw away the battery cells in the fire, 
and avoid short between electrodes. 

 Do not charge or heat. 

 Use the specified battery cells. 

 
 

 Set the battery cells correctly 

「+」

and 

「−」

 Remove the battery cells when the battery life is 
finished, or long time no using.    

 Do not mix old and new, or variety battery cells. 

The battery life will be affected by the

 

environmental temperature.

  

Caution

 

Warning

 

Caution

 

 

Содержание HA-400 Series




















Отзывы: