Anritsu BTS Master MT8222A, Руководство пользователя, Страница: 90 / 115

Master Software Tools 8-6 Emergency Repair Procedure
BTS Master UG PN: 10580-00156 Rev. T 8-7
5. Wait until the Ethernet menu is displayed, as shown in Figure 8-6 .
Additional explanations of the Ethernet menu submenu keys can be found in
Appendix C “Ethernet Menu” on page C-4 .
• If your BTS Master is configured for DHCP, then it immediately attempts to
obtain (lease) an IP address from the network DCHP server, and then displays
the IP address at the lower-left corner of the measurement display screen. If an
IP address is successfully acquired, then note and write down the IP address.
Press the
Back
key, skip Step 6 and Step 7, and go next to Step 8.
• If the BTS Master cannot obtain an IP address from the DHCP server, then it
will time out after approximately 3 minutes. The statement “DHCP Lease
Failed” will be displayed at the lower-left corner of the measurement display
screen. Go to Step 6, “DHCP Mode Second Attempt” .
• If your BTS Master is configured for STATIC IP, then it opens to the Static IP
configuration window and displays the current Static IP address at the lower-left
corner of the measurement display screen. To reconfigure the Static IP address,
go to Step 7, “Static Address Mode” .
6. DHCP Mode Second Attempt
a. Confirm that the connections, the Ethernet line, and communication on the LAN
to the test instrument are all functioning correctly.
b. Re-attempt to obtain an IP address through DHCP configuration. Press the first
submenu key, Press the
Type
submenu key to toggle the address mode (
Manual
or
DHCP
) to switch to
DHCP
configuration and automatically obtain an IP address.
Note and write down the IP address that is assigned to the BTS Master.
c. Press the
Back
submenu key. Return to the main bootstrap screen and go to
Step 8.
Figure 8-6. Ethernet Menu