Anritsu BTS Master MT8222A Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 115

Anritsu BTS Master MT8222A Скачать руководство пользователя страница 22

General Information

1-11

Secure Environment Workplace

BTS Master UG

PN: 10580-00156 Rev. T

1-7

1-11

Secure Environment Workplace

This section details the types of memory in the BTS Master, how to delete stored user files in
internal memory, and recommended usage in a secure environment workplace.

BTS Master Memory Types

The instrument contains non-volatile disk-on-a-chip memory, EEPROM, and volatile DRAM
memory. The instrument is also supplied with an external USB flash drive. The instrument
does not have a hard disk drive or any other type of volatile or non-volatile memory.

Disk-On-A-Chip (DOC)

DOC is used for storage of instrument firmware, factory calibration information, user
measurements, setups, and .jpg screen images. User information stored on the DOC is erased
by the master reset process described below.

EEPROM

This memory stores the model number, serial number, and calibration data for the
instrument. Also stored here are the user-set operating parameters such as frequency range.
During the master reset process all operating parameter stored in the EEPROM are set to
standard factory default values.

RAM Memory

This is volatile memory used to store parameters needed for the normal operation of the
instrument along with current measurements. This memory is reset whenever the
instrument is restarted.

CompactFlash Card

This memory may be selected as the destination for saved measurements and setups for the
instrument. The user can also copy the contents of the internal disk-on-chip memory to the
CompactFlash memory for storage or data transfer. The external Flash USB can be
reformatted using the BTS Master or sanitized using software on a PC.
Refer to the

Chapter 4, “File Management”

for additional information on saving and copying

files to the CompactFlash memory.

External USB Flash Drive

This memory may be selected as the destination for saved measurements and setups for the
instrument. The user can also copy the contents of the internal disk-on-chip memory to the
external flash memory for storage or data transfer. The external Flash USB can be
reformatted or sanitized using software on a PC.
Refer to the

Chapter 4, “File Management”

for additional information on saving and copying

files to the USB flash drive.

«
...
20
21
22
23
24
...
»

Содержание BTS Master MT8222A




















































































































Отзывы:

Нет отзывов