Anritsu 3GPP, Руководство по измерениям

Страница: 232 / 244

8-4 W-CDMA EMF Menu EMF (Option 444)
8-12 PN: 10580-00234 Rev. Y 3GPP MG
Meas Params Menu (W-CDMA)
Key Sequence:
Measurements > OTA > EMF > Measurement Parameters
Scrambling Code: Press this key to toggle between Auto or Manual
scrambling code. Auto scrambling code determines the scrambling code
automatically.
The choice of Auto or Manual scrambling codes and the code lock/reset
options function in the same manner as Scrambling Code in W-CDMA OTA
measurement mode. Refer to
“OTA Setup Menu” on page 3-39 .
Manual Code: Press this submenu key to select a scrambling code index, 1
through 6. The key is active only in Manual mode, which is selected using the
Scrambling Code submenu key.
Refer to “General Measurement Setups” on page 3-5 for details on manually
setting up the scrambling code and related parameters.
On Off: Switches On/Off the manual codes.
Display Params: Opens the “Display Menu” on page 8-13 . Enter this
submenu to select the parameter you want displayed in the rightmost column
of the measurement results table.
Extr Factor: The extrapolation factor, when turned On (> 1), displays the
extrapolated P-CPICH numbers. The field strength values are not
extrapolated.
This parameter can be set between 1 and 100 (the network operator can
provide this number). It can be used to provide a safety margin in case of an
increase in transmit power from an LTE station. The fine tuning may be
based on operator input (system setup/power ratio) and/or per regulatory
requirements (margins). Refer to
“Measurement Results (W-CDMA)”
on page 8-14 .
Back: Returns to the “W-CDMA EMF Menu” on page 8-10 .
Figure 8-11. W-CDMA Meas Params Menu
Meas Params
Scrambling Code
Manual Auto
Manual Code
1 2 3 4 5 6
On
Off
Extr Factor
1.00
Back
Display Params