Anova TC98L, Инструкция и руководство пользователя

Страница: 27 / 40

EN
27
7.4.6. Belt replacement
Belt replacement must be done at an authorized service center. Replace belts as soon as they
show obvious signs of wear. Use original straps.
7.5. Lubrication
- Apply grease with an injector to the areas shown.
- Apply two or three injections of grease and wipe off excess grease.
- Lubricate the areas shown with engine oil.
- Wipe the area clean, apply a few drops of oil, then wipe up any drops or spills.
- Do not dirty the belt, brake shoe or tire with grease or oil, oil or grease will damage
them.
Important
Do not dirty the belt, brake shoe or tire with grease or oil; oil or grease will damage them.
8. WARRANTY
Millasur guarantees that if your product suffers from a manufacturing defect during the
established guarantee period, contact or go to your point of sale.
Your purchase invoice should be kept as proof of the purchase date. Your tool must be
returned to your dealer in an acceptable clean condition, in its original molded case, if
applicable to the unit, accompanied by your appropriate proof of purchase.
8.1. Warranty period
The legal guarantee period of the product begins on the original date of purchase by the first
initial buyer and its duration will be that established by the Royal Decree-law of protection of
consumers and users against situations of social and economic vulnerability of the year
corresponding to the moment of purchase of the product.