background image

13 

 

 

 

 

15° 15°

10° 

Grass on a slope must be mowed moving up and down and never perpendicular to the slope. 

 

When changing direction, be very careful that the wheels facing up the slope do not hit any obstacles 

(such as stones, branches, roots, etc.) that could cause the machine to slide to the side, tip over, or 

cause the machine to slide sideways. lose control. 

 

 

DANGER

SLOW DOWN BEFORE ANY DIRECTION CHANGE ON SLOPES, and always 

apply the parking brake before leaving the machine stationary and unattended. 

 

CAVEAT

Start moving forward very carefully on sloping ground to avoid the risk of tipping over. 

Reduce forward speed before going on a slope, especially downhill. 

 

DANGER

, use reverse to slow down going downhill: this could cause you to lose control of the 

vehicle, especially on slippery terrain. 

 

 

5.6 TRANSPORT 

 

CAVEAT

: If the machine is transported on a truck or trailer, use proper handling equipment and 

enough people for the weight of the machine and the type of lifting system used. The machine must 

never be lifted with ropes and tackle. During transport, turn off the fuel stopcock, lower the mower deck, 

apply the parking brake, and secure the machine securely with ropes or chains to the hauling device. 

 

5.7 LAWN MAINTENANCE 

 

1. To maintain a green, smooth and attractive lawn, it must be mowed regularly. A lawn can be made 

up of different types of grass. If the lawn is mowed frequently, the grass and roots grow more 

vigorously, forming a solid grass bed. If the lawn is mowed less often, taller grass and weeds start to 

grow (more daisies and clovers, etc.). 

2. It is always better to mow the grass when it is dry. 

3. Blades must be in good condition and sharpened so that the grass is cut straight without a jagged 

edge causing yellowing at the ends. 

4. The engine must be running at the highest speed, both to ensure proper grass cutting and to obtain 

the necessary thrust to throw the clippings through the collector channel. 

5. Mowing frequency should be in relation to the growth rate of the grass. The grass should not be 

allowed to grow too long between one cut and the next. 

6. During hot, dry periods, the grass should be cut a little higher to prevent the soil from drying out. 

7. The proper grass height on a well-kept lawn is approx. 4-5cm. With one cut, it is not necessary to 

remove more than a third of the total height. If the grass is very tall, it should be cut twice in a twenty-

four hour period: the first time with the blades at maximum height, possibly reducing the width of cut, 

and the second time cut to the desired height. 

8. The appearance of the lawn will be improved if you alternate cutting in both directions. 

9. If the collector system tends to get blocked with grass, you should reduce ground speed as it may be 

too fast for the grass condition. If the problem persists, the probable causes are dull blades or warped 

wings. 

10. Be very careful when mowing near bushes or curbs as they may distort the horizontal position of 

the mower deck and damage its edge and blades. 

 

 

 

 

 

Содержание TC102































Отзывы: