anovafurnishings.com
888.535.5005 tel
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
Assembly InstructIons
l1364
8 ft Rendezvous Bench
l1366
12 ft Rendezvous Bench
l1508
8 ft Horizon Bench
l1512
12 ft Horizon Bench
tools needed:
9/16” Open-end or Box-end Wrench
•
Ratchet with 9/16” Socket
•
#4 Phillips Screwdriver
•
Level
•
Assembly HArdwAre:
8 x
3/8”
Washer
6 x
3/8”
Flanged Hex Nut
4 x
3/8” X 1.5”
Phillips Head Bolt
Assembly:
The assembly is a two-person operation.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2. Place a Contour Bench Seat on the shipping packaging or other soft surface to avoid scratching the product.
2 x Contour Bench Seat
Seat pattern may vary.
bencH components:
3 x Bench Supports
Model L1508 shown.
2 x
3/8” X 2”
Phillips Head Bolt
3. Align the mounting holes in one of the Bench
Supports with the holes in the appropriate end of
the Bench Seat. Insert one of the provided 1.5” long
Bolts through both parts, with the Bolt head on
the outside surface of the Bench Support. Install a
Washer and Nut on the inside end of the Bolt.
Note: Always hold the Bolt head still and turn the Nut.
This protects the surface of the Bench Support
around the Bolt from scratches (the Washer
protects the nut side of the Bench Seat).
Leave the hardware finger tight so that
adjustments can be made to level the Bench Seat.
Install a Bolt, Washer, and Nut through the other
set of mounting holes in that end of the Bench
Seat. Again, leave the hardware finger tight.
