Do not drag the assembled unit across any surface.
•
This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to
•
remove surface dirt. Do not clean with a solvent or petroleum based products.
Furniture must not be used other than for its intended purpose and should be inspected regularly for loose,
•
missing, or broken hardware, and general instability.
Furniture that is damaged or appears to be unstable must be removed from service and be repaired or replaced.
•
Repairs must be made using only factory authorized parts and methods.
•
wArnInG
cAre And
mAIntenAnce
211 No
rth Lindbergh Blvd.
St. Louis, MO 63141
tel: 888.535.5005
web:
anovafurnishings.com
11/2012
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
The feet of the Bench Supports
feature a surface mount cutout
for securing the Bench with
customer supplied surface
mount hardware.
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
Surface mount cutout dimensions
4. Repeat Step 3 with the other Bench Seat section and one of the
other Bench Supports as shown.
5. Position the remaining Bench Support between the two Bench
Seat sections and assemble them using the 2” bolts as shown.
Use a Washer for both the Nut and Bolt head as shown. Leave
the hardware finger tight so adjustments can be made to level
the Bench Seat.
6. Tighten the Bench Seat hardware using the Screwdriver and
Ratchet Wrench while checking the Seat surface with a Level;
minor adjustments can be made while tightening the hardware
to make the Seat level.
7. Retighten all hardware two weeks after initial assembly.
