anovafurnishings.com
888.535.5005 tel
Assembly InstructIons
l1301s
Rendezvous Bistro Table
l1401s
Latitude Bistro Table
l1701s
Cosmopolitan Bistro Table
tools needed:
Ratchet with 1/2” Socket
•
1/2” Open End or Box End Wrench
•
#4 Phillips Screwdriver
•
5/32” Allen Wrench
•
7/16” Open End or Box End Wrench
•
4 x
5/16 X 1.25”
Hex Head Bolt
Assembly:
The assembly is a two-person operation.
Inspect the shipping container contents for damage and to determine that all components and hardware are present.
1.
tAble components:
Assembly HArdwAre:
16x
5/16” Flat
Washer
Swivel
16 x
1/4”
Nylock Nut
Packing cardboard or
other soft work surface
8 x
5/16 X 1.25”
Phillips Hd Screw
S135 - HRD132
Seat Support
Assemble the Table over the shipping packaging
2.
or padded work area to avoid scratching the
product.
note:
Before assembling the Nuts to the Bolts, it is
recommended that a light oil or petroleum jelly be
applied to the screw threads.
Locate the Seat Support and place the Support on
3.
the work surface with the seat platforms oriented
upward.
Locate one of the Seat Swivels. Position the Seat Swivel on one
4.
of the Seat Platforms so that the mounting holes in the Seat
Swivel align with the mounting holes in the Seat Platform.
note:
The word “Front” is stamped into the frame of the swivel.
This should be oriented toward the center of the Table
assembly.
Install four of the 1/4” Button Head Allen Screws through the
bottom plate of the Swivel and the Support Mounting Plate.
Add 1/4” Nylock Nuts and tighten the Nuts after all four Screws
are installed.
Install the remaining Seat Swivel in the same manner. The
Screw heads must be inside the Swivel and the Nylock Nuts
must be outside of the Swivel for the Swivel to work properly.
1 x Seat Support
1 x Table Top
2 x Seat Mount
2 x Contour Seat
(Pattern may vary)
Seat Platform
Seat Support
2 x Swivel
12 x
5/16”
Nylock Nut
16 x
1/4 x 5/8” Button
Head Allen Screw
1
1
2
2
3
3
4
4
A
A
B
B
C
C
D
D
SHEET
1 OF 1
DRAWN
CHECKED
QA
MFG
APPROVED
BMENDEZ
6/19/2014
DWG NO
TITLE
SIZE
C
SCALE
REV
1/4” Screw
