Anolis ArcPixel Power CE, Руководство пользователя

Страница: 20 / 26

20
3. Press the [ENTER] to go back to the menu "New Dot" and select dot 1 and press the [ENTER] to enter the
menu "Miss Dot". The Dot 1 starts flashing in green and by means of items Sel 1, Sel 2 select the following
colour combination of dots when the blue dot will be after dot 1-picture (5).
4. Press the [ENTER] to go back to the menu "New Dot and using items Sel 1, Sel 2 you can see incorporated
dots -picture (6), (7).
4 5 6
7
5. Select the item "Check channel" , press the [ENTER] and after dot checking procedure the message "Ch. 2
Cfg Mismatch" will appear.
Press the [ENTER] to enter menu "New Dot" and use the [UP] and [DOWN ] to browse items Sel 1, Sel 2 Sel
3 (appropriate dot lights in green) - pictures (8),(9), (10).
8 9 10
The blue dot is not closely
to the green dot