ArcControl 128
3
SCENE MODE
The left and right buttons allow you to change the current scene. A scene can be static (one step)
or dynamic (several steps with fade/holdtime).
DIMMER MODE
The left and right buttons can be used to change the brightness. Pressing the 2 arrows
simultaneously will reset to the default level.
3. Installation
1. Mount an electrical box inside the wall
The ArcControl 128 can be installed in a standard 60mm electrical backbox.
You can insert the AC/DC adapter (if you use it) inside or outside the backbox.
2. Connect the wires
DMX: Connect the DMX cable to the lighting receivers (Leds, Dimmers, Fixtures..)
(for XLR: 1=ground 2=DMX- 3=DMX+)
POWER: Connect the AC/DC adapter, 5,5-12V/500mA. Make sure to not invert the + and the ground.
Содержание ArcControl 128
Страница 1: ...Version 1 0...
