Cleaning
·
First read the instructions in the section titled
“
IMPORTANT SAFETY INSTRUCTIONS
”.
·
Always disconnect the kettle from the mains power outlet
socket before cleaning.
·
Before cleaning, make sure the kettle is cool to touch.
·
Empty the kettle. Clean the exterior surface of the kettle
with a clean, damp cloth to preserve its original polished
finish. Dry and polish with a soft cloth.
·
Do not use abrasive cleansers or scouring agents/pads
of any kind inside or on the exterior of the kettle.
·
Open the lid, lift out the filter, rinse the filter under warm
water and brush off any impurities.
·
Refit the filter and lid in reverse order.
·
Only use a dry cloth to wipe the base of the kettle.
·
Avoid wetting the electrical parts.
·
To prevent electric shock do not immerse the kettle or
power base in water or other liquid, and make sure the
electrical parts are kept dry.
Descaling
·
Half-fill the kettle with tap water and add the juice of 1
lemon to the water.
·
Boil this mixture and allow it to stand for 15 minutes.
Re-boil the mixture and allow it to stand a further 15
minutes. Re-boil this mixture a third time then rinse the
kettle thoroughly.
TECHNICAL DATA
Voltage: 220-240V~ 50-60Hz
Power: 1850-2200W
