FEATURES OF KETTLE
1. Lid
2. Kettle body
3. Handle
4. Water window
5. Switch button
6. Power base
Before first use
Before first use, it is recommended to operate the kettle for
2 or 3 times, following the instructions below, and discard
the water. This will remove any dust or residue remaining
from the manufacturing process.
·
Remove kettle from the power base before filling.
·
To fill the kettle, open the top lid by pulling on the lid
handle, then fill the kettle with cold water (note: the water
level must be between the minimum mark, 0.75L and
maximum mark,
1.7L). Close the lid by pushing it down
until it clicks into place.
·
Connect the power supply cord plug into a mains power
outlet socket. Press down on the ON/OFF switch, and the
power indicator will light up.
·
When the water has boiled, the kettle will automatically
switch itself OFF. You can stop the boiling process at any
time by lifting the ON/OFF switch. The power indicator light
will go out.
