9
Note
: Remote control require 2x AAA batteries (not included)
To install the batteries, first remove the battery cover on the remote control by sliding the
battery cover back. Install the batteries in correct polarity inside the battery compartment
matching the polarity shown and then refit the battery compartment cover securely.
Battery type: “1.5V 2x AAA”. Alkaline batteries recommended.
To prevent overheating DO NOT mix new and old batteries in the remote control.
To prevent corrosion, remove the batteries if the remote control is not used for a long period of
time.
OPERATION
Before first use, charge the vacuum cleaner for 12 hours.
When Start/Pause indicator glows with steady white light, it indicates the device is fully
charged. Short press
button on device or press
button on remote control,
vacuum will start auto cleaning.
To change cleaning mode, press
to pause the operation, then press desired
cleaning mode button to restart cleaning.
To turn the vacuum cleaner off, initially pause the cleaning then press and hold the
button on device for 4 seconds. The charge Home indicator will flash red four
times and the robot vacuum will shut down.
Cleaning mode
Spot Cleaning
The vacuum intensively cleans a specific area in a spiral
pattern, useful if there is a concentrated area of dust or
debris. When in the Spot Cleaning mode, the vacuum will
stop cleaning after 1 minute.
