background image

 

IMPORTANT SAFEGUARDS 

 
FOR HOUSEHOLD USE ONLY. 
 
This appliance should only be used for domestic cleaning, and must only be used 
indoors, as described in this user guide. 

1.  Always switch off and remove the charger from the socket before cleaning the 

appliance or any maintenance task. 

2.  This appliance is not intended for used by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning 
use of the appliances by a person responsible for their safety. 

3.  Children should be supervised to ensure that they do not play with the 

appliance.   

4.  If the power cord is damaged, it must be replaced by a qualified electrician in 

order to avoid hazard or the appliance must be disposed of. 

5.  Keep hands, feet, loose clothing and hair away from rotating brush. 
6.  Use only the original charger supplied with the appliance. 
7.  Check that your supply voltage is the same as that stated on the charger. 
8.  When charging the appliance, the power switch must be off. 
9.  Never charge the batteries in temperatures above 37°C or below 0°C. 
10.  It is normal for the charger to become warm to the touch when charging. 
11.  Use only attachments provided. 
12.  Static electricity: some carpets can cause a small build up of static electricity. Any 

static discharge is not hazardous to health. 

13.  To prevent damage: Do not suck up liquids or ash! 
14.  Do not use your appliance out of doors or on any wet surface or for wet pick up. 
15.  Do no spray with or pick up flammable liquids, cleaning fluids, aerosols or their 

vapors. 

16.  Do no continue to use your appliance or charger if it appears faulty. 
17.  Do not leave the appliance unattended when in use. 

18.  Never use the appliance without the filters in place! 

19.  Check the filters are inserted correctly! 
20.  Do empty the Dust Bin regularly for optimal operation of the vacuum. 
21.  Do not replace the batteries with non-rechargeable batteries. 

22.  The vacuum must use only with provided battery charger: 

YLS0241A-A165060. 

 

WARNING: Do not recharge non-rechargeable batteries.

 

 

WARNING: Before charging the product, please make sure your hands are dry. 

Содержание M3C-D
















Отзывы: