Page 10 of 16
4.2 Massage Control Operation
•
Sit in a comfy chair with the massager at the front of the chair and slide your
feet inside the massager.
There are Five Control Buttons (Timer, Mode, Intensity, Heat, On / Off)
4.2.1 On / Off
After the unit is plugged in and turned on at the power point, the blue indicator
light inside the On / Off button will start to flash.
Press the power button and the massager begins to operates in the default
mode, being Mode 1.
The blue indicator light inside the On / Off button will stop flashing and remain
permanently on. The Timer button, Mode button and Intensity button will also
illuminate with a blue light.
Note
: Refer to Massage Mode section for explanation on Mode settings.
Press the power button again to stop the massager.
The Blue indicator light inside the On / Off button will flash.
4.2.2 Heat
When the unit is powered ON and the massage function is started, press the
heat button.
The blue indicator light inside the Heat button will illuminate and the rotating
massage fingers under your feet will start to slowly warm up.
To stop the heating function, press the Heat button again. The blue indicator
light will turn off.
Timer
Mode
Intensity
Heat
On / Off
