anko EV-6803-S259 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 28

anko EV-6803-S259 Скачать руководство пользователя страница 6

Page 6 of 28

WARNING

Only use the Battery Charger which was supplied with this appliance.

Model No. ZD12D300050AU 100–240V~ 50/60Hz 0.5A Output: 30.0V 500mA

The battery charger is detachable.

Battery Pack Specification: EV-6803 Type: Li-ion, 25.9Vd.c., 2200mAh

Consumers are cautioned against using and/or purchasing counterfeit and/or inferior

quality batteries. These batteries have the potential to cause fire, personal injury, and/or

damage to property. These batteries are typically found on online-auction websites or

from other retailers and are known to pose a potential safety risk.

This appliance contains batteries that are Non-replaceable.

Never try to recharge Non-Rechargeable batteries as they may explode, catch on fire

or cause personal injury and/or damage to property.

-

May explode if disposed of in fire.

-

To prevent injury or burns, do not allow metal objects to contact battery

terminals.

-

Do not use or store in temperatures above 40°C

The Battery Pack must be removed from the vacuum cleaner before disposal.

Contact your local waste management authority for more information on Battery

Recycling and disposal regulations in your area.

This symbol on the product or its packaging indicates:

Do not dispose of electrical appliances or batteries as unsorted municipal waste, use

separate collection facilities. Contact your local council for information regarding the

collection systems available. If electrical appliances are disposed of in landfills or

dumps, hazardous substances can leak into the groundwater and get into the food

chain, damaging your health and well-being. Please contact your local council or

regional authority for more information on the collection, reuse, and recycling

programmes.

If this appliance is used by a third party,

DO

supply the instruction manual with it.

No liability can be accepted for any damage caused by non-compliance with these

instructions or any other improper use or mishandling of the appliance.

This product has not been designed for any uses other than those specified in this

manual.

ONLY

for domestic use. Industrial or commercial use invalidates the warranty.

«
...
4
5
6
7
8
...
»

Содержание EV-6803-S259





























Отзывы:

Нет отзывов