anko EV-6803-S259 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 28

anko EV-6803-S259 Скачать руководство пользователя страница 24

Page 24 of 28

11 Storage

11.1 Wall Mount Storage / Charging

There is a Storage / Charging Bracket with a Tool Holder supplied with

screws and wall plugs should you prefer to hang the vacuum cleaner on the

wall.

To install the Storage / Charging Bracket, position the Storage / Charging

Bracket on the wall, near a power point and at a suitable height where the

vacuum cleaner will not touch the floor.

Mark the screw holes through the Storage / Charging Bracket

onto the wall.

Using a suitable drill (wood drill bit for a timber wall, or masonry

drill bit for brick / concrete walls, drill holes Ø6mm and 35 - 40mm

deep.

Insert the plastic wall plugs into each hole and gently hammer in

until they are flush with the wall, place the Storage Bracket over the holes

then insert the screws and tighten up. Do Not Overtighten.

11.2 Vacuum Cleaner / Tool

When finished using the vacuum cleaner, empty the dust canister and clean

the filters.

You can either recharge the battery first or store it away in a dry cool place.

Switch off and unplug the battery charger when not in use, or when fully

charged.

Store the Tool on the wall mount bracket as shown.

Push the tool onto the holder until it locks in place.

«
...
22
23
24
25
26
...
»

Содержание EV-6803-S259





























Отзывы:

Нет отзывов