4 |
P a g e
PARTS
(A)
Swivel cord
(B)
On/Off switch
(C)
Power indicator
(D)
Barrel clamp lever
(E)
Bottom barrel
(F)
Top barrels
BEFORE FIRST USE
•
After unpacking the appliance, check for transport damage and that all the parts
mentioned in this manual are present. In the event of damaged or missing parts,
return the product back to Kmart.
•
Do not discard the original box. It can be used for storage and dispatch to avoid
transport damage.
•
Clean the appliance as described in Cleaning and Maintenance. For your safety, make
particular attention to the safety instructions supplied in the instructions manual when
using this product.
OPERATION
WARNING!
Never touch the hot curling barrels.
WARNING!
Always use the handle to hold the styler.
ATTENTION!
The curling barrels cool down slower than it heats up.
•
Fully unwind the supply cord. Make sure the ON/OFF switch (B) is in OFF position.
•
Fold out the wire stand and place the appliance on a stable, flat, dry, heat resistant
surface.
•
Connect the power plug to a mains power outlet socket.
•
Push the ON/OFF switch (B) to ON position, and the Power indicator (C) will light up.
ATTENTION!
The barrel heats up very fast. It takes approx. 3 minutes to reach max.
temperature.
•
When the appliance is ready, you may start hair styling.
•
Take a section no more than 3cm wide.
•
Position the hot barrels at least 10cm from the roots without touching the scalp.
•
Place the hair strands between the top and bottom barrels, then release the barrel
clamp lever.
•
Hold the hair styler in place for 8-10 seconds to create gentle waves.
